Revak Maxi 200cm
REVAK MAXI is a height adjustable disposable concrete formwork system. All kinds of qualified fillings can be made at heights varying from 50 cm to 300 cm. The products are used as single-use "Disposable formwork" and shape the concrete to form hundreds of reinforced concrete arches, domes and supporting pillars that carry the floor. In large open areas, a reinforced concrete structure that carries the floor is created with minimum fabrication. The system provides unique transportation, horizontal-vertical transport and space saving compared to alternative fillings. Savings are provided from concrete, iron and all other filling materials used in the manufacture of flooring, and the whole structure becomes light. The spaces created by the disposable formworks can be ventilated and all kinds of mechanical / electrical installation passages can be made. Thanks to the PVC columns that can be adjusted by cutting, all kinds of steps and ramps can be made. At the same time, high load capacity is guaranteed with low concrete consumption. The load is actually supported by concrete columns formed in pipes placed on top of the REVAK MAXI element and discharged to the lower surface. Providing an economical and sustainable design, REVAK MAXI allows a ventilated floor covering at high heights. The vacuum under the floor provides a naturally ventilated screening space or a mechanically ventilated screening space to remove ground-escaping moisture and harmful gases such as radon gas, saving expensive and bulky fill materials, and facilitating transition and maintenance.